ETS-Lindgren HI-4455 Isotropic Field Probe (Archived) - Manual (Page 27)

© ETS-LINDGREN L.P. – August 2005
Revision D- Part No. H-600076
6. APPENDIX A: HI-4455 ERROR CODES
PROBE ERROR OUTPUT
If an error occurs, the probe will respond with one of the following strings.
These strings begin with a colon and end with a carriage return.
E01
Communication error (e.g., overflow).
E02 Buffer full error. Too many characters contained between the
Start Character/Carriage Return sequence.
E03 The received command is not valid.
E04 The received parameter is not valid.
E05 Hardware error (e.g., EEPROM failure).
E06 Parity error.
Archived 4/2/10