Hybrid Racing HR K-Series Fuel Rail - Manual (Page 4)

4
STEP 5:
Using a 12mm socket, remove
the (2) nuts holding the fuel rail
on and pull the fuel rail off the in-
take manifold as illustrated in FIG
5. Note: All 4 injectors will likely
come out with the fuel rail.
STEP 4:
Place a rag around the fuel line,
then squeeze the (2) green tabs
and pull the fuel line off as shown
in FIG 3B. Be careful when doing
so as there will likely be pressure
in the fuel line.
Install Guide
STEP 3A:
Remove the cap covering the
fuel line connection as shown in
FIG 3A.