Hybrid Racing HR K-Series Fuel Rail - Manual (Page 5)

5
STEP 6:
Using a flathead screwdriver, pull
the clips off holding all (4) injec-
tors in the stock fuel rail as
shown in FIG 6. Note: once you
pull one injector out, fuel is going
to flow out of the fuel rail. Make
sure you have something ready
to catch it.
Install Guide
STEP 8:
Install the (4) injectors into your
Hybrid Racing fuel rail. Once this
is done it should appear as the
one in FIG 8. Note: Spread some
oil on the O-ring with your finger
before installing the injectors to
help them slide in without getting
cut.
STEP 7:
Remove the blue quick discon-
nect clip from the OEM fuel rail
and slide it onto the –8 to 5/16
quick disconnect union as illus-
trated in FIG 7.