Rear climate control — if equipped – Jeep 2010 Commander - Owner Manual User Manual

Page 233

Advertising
background image

Recirculation mode to be selected while in the defrost or
defrost/floor modes. Attempting to use Recirculation
while in these modes will cause the LED in the button to
blink and then turn off.

Rear Climate Control — If Equipped

The Manual Rear Climate Control system has one floor
air outlet (passenger side), and two panel outlets in the
rear quarter trim (on each side). The unit provides warm
or cool air through the floor and upper outlets.

If rear heating/cooling is desired, press the Rear On/Off
Switch (located in the upper switch bank above the
controls) and select Floor, Bi-Level, or Panel from the
Rear Control Panel (right knob located on the right rear
quarter trim panel).

The rear temperature, blower speed, and mode control
can be adjusted as desired by the third row seat occu-
pants.

Rear On/Off Switch

4

UNDERSTANDING YOUR INSTRUMENT PANEL

233

Advertising
This manual is related to the following products: