Driver memory seat — if equipped – Jeep 2010 Commander - Owner Manual User Manual

Page 98

Advertising
background image

To Raise Rear Seat

1. Open the tailgate.

2. Detach pull strap from back of seat and pull seatback
upward until it locks into place. Reattach strap.

3. Close the tailgate.

WARNING!

The cargo area in the rear of the vehicle (with the rear
seatbacks in the locked-up or folded down position)
should not be used as a play area by children when
the vehicle is in motion. They could be seriously
injured in an accident. Children should be seated
and using the proper restraint system.

DRIVER MEMORY SEAT — IF EQUIPPED

Once programmed, the memory buttons 1 and 2 on the
driver’s door panel can be used to recall the driver’s seat,
driver’s outside mirror, adjustable brake and accelerator
pedals and radio station preset settings. Your Remote
Keyless Entry (RKE) transmitters can also be pro-
grammed to recall the same positions when the UN-
LOCK button is pressed.

Pull Strap

98

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising
This manual is related to the following products: