Kendon Dual Ride-Up SRL Stand-Up - Manual (Page 14)

714-630-7144 www.KendonUSA.com
- 12 -
Proper Ramp Storage
There are two (2) different ramp storage locations.
1. Storage while towing.
2. Storage when trailer is folded up and stood up for storage.
Ramp Storage while Towing:
The ramp attaches on top of the fully open deck on the diamond plate in the
middle of the trailer. The ramp must be in its folded position in order to properly
attach to the trailer bed. Align the slotted brackets on the ramp to the extension
nuts on the auxiliary ramp bracket mounted to the top of the trailer. Lock the
ramp down with the provided T-Bolts and firmly tighten T-Bolts. Ensure that the
T-Bolt handles are aligned perpendicular to the trailer bed to lock the ramp flaps
in place.
Failure to properly attach and tighten ramp and T-Bolts could cause ramp to
separate from trailer causing damage, injury and/or death. It is
recommended to check the T-Bolts regularly at pit stops.