Kontron CP346 - Manual (Page 37)

CP346 Functional Description
ID 27253, Rev. 03 © 2005 Kontron Modular Computers GmbH Page 2 - 9
P R E L I M I N A R Y
2.4.1.2 Connectors of 37-Pin-to-4x9-Pin Front Panel Adapter
In order to provide separate serial I/O channelling, a four-channel front panel adapter cable can
be connected to the 37-pin front panel connector. This adapter terminates on the user side with
four male 9-pin D-Sub connectors which include the signals of channels 0 to 3. The pinouts of
the adapter’s 9-pin D-Sub connectors are shown in the following table.
Warning!
Where signals are not indicated in the table below or marked with NC,
please do not connect external wiring to the connector pins. Failure to
comply may result in damage to your board.
Table 2-2: 9-Pin D-sub Connector Pinouts for Front Panel
DSUB Pin No. RS 232 Signal RS 485 Signal Half-Duplex RS 422 Signal Full-Duplex
1 DCD NC RXD+
2 RXD NC NC
3 TXD TRXD+ TXD+
4 DTR NC NC
5 GND GND GND
6 DSR NC RXD-
7 RTS NC NC
8 CTS TRXD- TXD-
9 RI NC NC