Kontron CP346 - Manual (Page 39)

CP346 Functional Description
ID 27253, Rev. 03 © 2005 Kontron Modular Computers GmbH Page 2 - 11
P R E L I M I N A R Y
Warning!
The power signals (+5V and GND) are power supply OUTPUTS to supply the
rear I/O module with power. These pins MUST NOT be connected to any other
power source, either within the backplane itself or within a rear I/O module.
Failure to comply with the above will result in damage to your board.
In addition, all pins marked reserved or N/C must not be used for any other pur-
poses.