Kontron CP-RIO3-04S - Manual (Page 29)

CP-RIO3-04S Functional Description
ID 1036-1669, Rev. 1.0 Page 2 - 9
2.1.6 Rear I/O Interface on CompactPCI Connectors rJ2
The CP-RIO3-04S is equipped with one CompactPCI rear I/O connector rJ2.
Figure 2-7: Rear I/O CompactPCI Connectors rJ2
Warning!
To support the rear I/O feature, a 3U CompactPCI backplane with rear I/O sup-
port as well as a compatible and correctly configured CPU board are required.
Do not plug the CP-RIO3-04S in a backplane without rear I/O support.
Failure to comply with the above will result in damage to the CP-RIO3-04S.
Warning!
The CP-RIO3-04S may be used only with CPU boards that have a compatible
rear I/O CompactPCI connector pinout, such as the CP305, CP307 and
CP308 from Kontron.
Failure to comply with the above may result in damage to the CP-RIO3-04S or
the CPU board.
Note:
Pinrow F: GND
Pinrow Z: NC
22
1
A B C D E
Z F
rJ2