Kontron CP6003-RC - Manual (Page 35)

CP6003-RA/RC Introduction
ID 1046-3890, Rev. 1.0 Page 1 - 15
P R E L I M I N A R Y
Interfaces
Rear I/O The following interfaces are routed to the rear I/O connectors J3 and J5.
• COMA (RS-232 signaling) and COMB (RS-422/RS-232 signaling); no
buffer on the rear I/O module is necessary
• 4 x USB 2.0
• 1 x CRT VGA, 2 x HDMI/DVI
• 1 x HDA
• 2 x Gigabit Ethernet (compliant with PICMG 2.16, R 1.0)
• 2 x Gigabit Ethernet
• 4 x SATA 3 Gb/s
• 4 x GPIs and 4 x GPOs (LVTTL signaling)
The rear I/O connector J4 provides rear I/O interconnection to the PMC/XMC
interface.
Gigabit Ethernet
Up to five 10 Base-T/100 Base-TX/1000 Base-T Gigabit Ethernet interfaces
based on one Intel® 82579LM Gigabit Ethernet controller and one Intel®
82580EB Quad Gigabit Ethernet controller:
• Three RJ-45 connectors on the front panel (CP6003-RA)
• Two ports switchable between front I/O and to rear I/O (CP6003-RA)
• Two Gigabit Ethernet interfaces on rear I/O with disable option in
uEFI BIOS (CP6003-RC)
• Two ports on the rear I/O (PICMG 2.16)
• Automatic mode recognition (Auto-Negotiation)
• Automatic cabling configuration recognition (Auto-MDI/X)
USB
Up to six USB ports supporting UHCI (USB 1.1) and EHCI (USB 2.0):
• Two type A USB 2.0 connectors on the front panel (CP6003-RA)
• Four USB 2.0 ports on the rear I/O interface
Serial The CP6003-RA provides two 16C550-compatible UARTs :
• One RS-232 port either on the front panel or on the rear I/O, COMA
• One RS-422 / RS-232 port on the rear I/O, COMB
The CP6003-RC provides two 16C550-compatible UARTs :
• One RS-232 port on the rear I/O, COMA
• One RS-422 / RS-232 port on the rear I/O, COMB
PMC PMC interface:
• Four onboard mezzanine connectors, (Jn1-Jn4), for connecting a PMC
module
• Up to 64-bit / 66 MHz PCI or up to 64-bit / 133 MHz PCI-X interface with
dedicated PCIe-to-PCI-X bridge
• Only 3.3V PCI signaling voltage
• Rear I/O supported through the CompactPCI connector J4
• Supported voltages: 3.3 V, 5 V, +12 V, and -12 V
• Support for PMC modules (CP6003-RA)
• Support for CCPMC modules (CP6003-RC)
XMC XMC interface:
• One onboard XMC connector (P15)
• Up to x8 lanes PCI Express 2.0 ports operating at 5 GT/s
• Rear I/O supported through the PMC connector (Jn4) to the
CompactPCI connector J4
• Support for XMC modules (CP6003-RA)
• Support for conductive-cooled XMC modules (CP6003-RC)
Table 1-2: CP6003-RA/RC Main Specifications (Continued)
FEATURES SPECIFICATIONS