Kontron AT8902M - Manual (Page 87)

AT8902M Software Description
Page 4 - 22 AT8902M User Guide
4.5.3 Updating IPMI
Updating the IPMI firmware is different from updating the other software parts as updating is
done directly when invoking the download command. In the case that the update procedure
fails or the update image is corrupted, the IPMC will be able to restart all the same by means
of its rollback functionality. The IPMI software package file is stored in the result/ppc405/firm-
ware path of the release directory tree. To update the IPMI firmware, the CLI command ‘down-
load’ is used:
(Base Fabric) #download ipmifw tftp://192.168.50.5/ipmi.pkg
Flashing a new IPMI firmware will disable the IPMI Controller for some minutes.
Are you sure to update the IPMI firmware? (y/n)y
...
(Base Fabric) #