10 ethernet connectors, 1 ethernet connector 1 (ether1), 986lcd-m family – Kontron 986LCD-M-mITX (BGA) User Manual

Page 42

Advertising
background image

986LCD-M Family

KTD-N0837-B

Public

User Manual

Date: 2012-04-17

Page

42 of 91


4.10 Ethernet connectors.


The 986LCD-M/mITX and 986LCD-M/ATXP boards supports 3 channels of 10/100/1000Mb Ethernet
RTL8111B LAN controllers.
The 986LCD-M/Flex and 986LCD-M/ATXE boards supports 2 channels of 10/100/1000Mb Ethernet
RTL8111B LAN controllers.

In order to achieve the specified performance of the Ethernet port, Category 5 twisted pair cables must be
used with 10/100MB and Category 5E, 6 or 6E with 1Gb LAN networks.


The signals for the Ethernet ports are as follows:

Signal

Description

MDI[0]+

In MDI mode, this is the first pair in 1000Base-T, i.e. the BI_DA+/- pair, and is the transmit
pair in 10Base-T and 100Base-TX.

In MDI crossover mode, this pair acts as the BI_DB+/- pair, and is the receive pair in
10Base-T and 100Base-TX.

MDI[0]-

MDI[1]+

In MDI mode, this is the second pair in 1000Base-T, i.e. the BI_DB+/- pair, and is the
receive pair in 10Base-T and 100Base-TX.

In MDI crossover mode, this pair acts as the BI_DA+/- pair, and is the transmit pair in
10Base-T and 100Base-TX.

MDI[1]-

MDI[2]+

In MDI mode, this is the third pair in 1000Base-T, i.e. the BI_DC+/- pair.

In MDI crossover mode, this pair acts as the BI_DD+/- pair.

MDI[2]-

MDI[3]+

In MDI mode, this is the fourth pair in 1000Base-T, i.e. the BI_DD+/- pair.

In MDI crossover mode, this pair acts as the BI_DC+/- pair.

MDI[3]-


Note: MDI = Media Dependent Interface.

4.10.1 Ethernet connector 1 (ETHER1)


Ethernet connector 1 is mounted together with USB Ports 0 and 2.
(Not available on 986LCD-M/Flex and 986LCD-M/ATXE).

The pinout of the RJ45 connector is as follows:

Signal

PIN

Type

Ioh/Iol

Note

MDI0+

MDI0-

MDI1+

MDI2+

MDI2-

MDI1-

MDI3+

MDI3-

8 7 6 5 4 3 2 1


On top of Ethernet1 connector there is a Green LED (to the left) turning on when a 100MHz connection is
made and it is flashing when 100MHz traffic is ongoing. The Yellow LED (to the right) turns on when a 1GHz
connection is made and it is flashing when traffic is ongoing.

Advertising
This manual is related to the following products: