Kontron 986LCD-M-mITX (BGA) - Manual (Page 44)

986LCD-M Family
KTD-N0837-B Public User Manual Date: 2012-04-17 Page 44 of 91
4.11 Firewire/ IEEE-1394 connectors.
The 986LCD-M boards supports two IEEE Std 1394a-2000 fully compliant cable ports at 100M bits/s, 200M
bits/s, and 400M bits/s.
4.11.1 IEEE1394 Connector (IEEE1394_0)
The pinout of the Firewire / IEEE1394 connector IEEE1394_0 (stacked together with USB Ports 4 and 5) is
as follows:
Note
Pull
U/D Ioh/Iol Type Signal PIN
TPA0+
TPB0+
GND
10 12 14
9 11 13
1 +12V
TPB0-
TPA0-
Note 1: The 12V supply for the IEEE1394_0 devices is on-board fused with a 1.5A reset-able fuse.
Signal Description
TPA0+ / TPA0– Differential signal pair A
TPB0+ / TPB0– Differential signal pair B
+12V +12V supply
4.11.2 IEEE1394 Connector (IEEE1394_1)
The IEEE1394_1 is not mounted on the 986LCD-M/Flex.
The pinout of the Firewire / IEEE1394 connector IEEE1394_1 is as follows:
Note
Pull
U/D Ioh/Iol Type Signal
PIN
Signal Type Ioh/Iol
Pull
U/D Note
TPA1+ 1 2 TPA1-
GND 3 4 GND
TPB1+ 5 6 TPB1-
1 +12V 7 8 +12V 1
KEY 9 10 GND
Note 1: The 12V supply for the IEEE1394_1 devices is on-board fused with a 1.5A reset-able fuse.
Signal Description
TPA1+ / TPA1–
Differential signal pair A
TPB1+ / TPB1– Differential signal pair B
+12V +12V supply