Kontron 986LCD-M-mITX (BGA) - Manual (Page 88)

986LCD-M Family
KTD-N0837-B Public User Manual Date: 2012-04-17 Page 88 of 91
8.7.3 Advanced Chipset Settings – SouthBridge Configuration
BIOS SETUP UTILITY
Chipset
South Bridge Chipset Configuration Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
<- Select Screen
|| Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
USB Functions [8 USB Ports]
USB 2.0 Controller [Enabled]
Audio Controller [Enabled]
Audio Jack Sensing [Auto]
SMBUS Controller [Enabled]
Restore on AC Power loss [Last State]
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature Options Description
USB Functions Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
USB 2.0 Controller Enabled
Disabled *
Audio Controller Enabled
Disabled
Audio Jack Sensing Auto
Disabled Auto: The insertion of audio jacks are auto
determined.
Disabled: Driver assumes that all jacks are
inserted (usefull when using Audio pinrow).
SMBUS Controller Enabled
Disabled
Restore on AC Power loss Power Off
Power On
Last State Select whether or not to restart the system after
AC power loss: Power Off keeps the power off
until the power button is pressed. Power On
restores power to the computer. Last State
restores the previous power state before power
loss occurred. See note.
Note: When the BIOS has "Recover on AC Power loss" = "last state" and if it is shut down from windows,
then it will not and shall not turn on automatically at next boot. This function is controlled by the IO Controller
and in case BIOS is upgraded (with Secure CMOS function enabled and different “Restore on AC Power
loss” setting) then the IO Controller will not be reprogrammed until next power up and complete BIOS boot
has been carried out.