Kontron 986LCD-M-mITX (BGA) - Manual (Page 68)

986LCD-M Family
KTD-N0837-B Public User Manual Date: 2012-04-17 Page 68 of 91
8.3.2 Advanced settings – IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration Options
Disabled
Compatible
Enhanced
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
ATA/IDE Configuration [Compatible]
Legacy IDE Channels [SATA Pri, Pata Sec]
Primary IDE Master : [Hard Disk]
Primary IDE Slave : [Not Detected]
Secondary IDE Master : [Not Detected]
Secondary IDE Slave : [Not Detected]
Hard Disk Write Protect [Disabled]
IDE Detect Time Out (Sec) [35]
ATA(PI) 80Pin Cable Detection [Host & Device]
Staggered Spin-up delay [Disabled]
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature Options Description
ATA/IDE Configuration Disable
Compatible
Enhanced Disable,
Compatible (SATA0 and SATA2 bootable)
Enhanced (all SATA ports bootable)
Feature Options Description
Legacy IDE Channels SATA Only
PATA Pri, SATA Sec
SATA Pri, PATA Sec
PATA Only
When P-ATA only mode is selected:
Feature Options Description
Configure S-ATA as Disabled
RAID Note: Install the driver via USB-Floppy
connected to USB port 2 (lower connector)