Kontron KT690-mITX (BGA) - dual core - Manual (Page 73)

KT690 Family
KTD-00738-J Public User Manual Date 2012-06-01 Page 73
8.3.5 Advanced settings – Super IO Configuration
BIOS SETUP UTILITY
Advanced
Configure Win627DHG Super IO Chipset Allows BIOS to Enable
or Disable Floppy
Controller.
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
OnBoard Floppy Controller [Enabled]
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Serial Port2 Mode [Normal]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature Options Description
OnBoard Floppy Controller Enabled
Disabled
Allows BIOS to Enable or Disable Floppy
Controller.
Serial Port1 Address Disabled
3F8/IRQ4
3E8/IRQ4
3E8/IRQ6
3E8/IRQ10
2E8/IRQ11 Select the BASE I/O addresse and IRQ.
(The available options depends on the setup for the
the other Serial Ports).
Serial Port2 Address Disabled
2F8/IRQ3
2E8/IRQ3
3E8/IRQ6
3E8/IRQ10
2E8/IRQ11 Select the BASE I/O addresse and IRQ.
(The available options depends on the setup for the
the other Serial Ports).
Serial Port2 Mode Normal
IRDA
ASK IR Select Mode for Serial Port2
Parallel Port Address Disabled *
378
278
3BC Select the I/O address for the PRINTER.
Parallel Port Mode Normal
Bi-Directional
EPP
ECP & EEP Select the mode that the parallel port will operate in
EPP Version 1.9
1.7 Setup with version of EPP you want to run on the
parallel port
ECP Mode DMA Channel DMA0
DMA1
DMA3 Select a DMA channel
Parallel Port IRQ IRQ5
IRQ7 Select a IRQ