Kontron KT690-mITX (BGA) - dual core - Manual (Page 76)

KT690 Family
KTD-00738-J Public User Manual Date 2012-06-01 Page 76
8.3.9 Advanced settings – Remote Access Configuration
BIOS SETUP UTILITY
Advanced
Configure Remote Access type and parameters Select Remote Access
type.
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
Remote Access [Enabled]
Serial port number [COM1]
Base Address, IRQ [3F8h, 4]
Serial Port Mode [115200 8,n,1]
Flow Control [None]
Redirection After BIOS POST [Always]
Terminal Type [ANSI]
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature Options Description
Remote Access Disabled
Enabled When Enabled then a remote PC can via one of the
serial ports behave like a TTY terminal, so that
keyboard and monitor (in a terminal window) is
emulated by the remote PC. As remote PC terminal
program the Windows Hyperterminal can be used.
Serial port number COM1
COM2 Setup which comport that should be used for
communication
Serial Port Mode 115200 8 n 1
57600 8 n 1
38400 8 n 1
19200 8 n 1
9600 8 n 1 Select the serial port speed
Flow Control None
Hardware
Software Select Flow Control for serial port
Redirection After BIOS POST Disabled
Boot Loader
Always How long shall the BIOS send the picture over the
serial port
Terminal Type ANSI
VT100
VT-UTF8 Select the target terminal type
VT.UTF8 Combo Key Support Enabled
Disabled Enable VT-UTF8 Combination Key Support for
ANSI/VT100 terminals
Sredir Memory Display Delay No Delay
Delay 1 Sec
Delay 2 Sec
Delay 4 Sec Gives the delay in seconds to display memory
information