Kontron KT690-mITX (BGA) - dual core - Manual (Page 81)

KT690 Family
KTD-00738-J Public User Manual Date 2012-06-01 Page 81
Feature Options Description
Quick Boot Enabled
Disabled Allows BIOS to skip certain test while booting in
order to decrease boot time.
Quiet Boot Disabled
Enabled Disabled: Displays normal POST messages.
Enabled: Displays OEM Logo (no POST messages).
AddOn ROM Display Mode Force BIOS
Keep current Set display mode for Option ROM.
Bootup Num-Lock Off
On Select Power-on state for numlock
PS/2 Mouse Support Disabled
Enabled
Auto Select support for PS/2 Mouse.
Wait for ‘F1’ If Error
(see note) Disabled
Enabled Wait for F1 key to be pressed if error occurs.
Hit ‘DEL’ Message Display Disabled
Enabled Displays “Press DEL to run Setup” in POST.
Interrupt 19 Capture Disabled
Enabled Enabled: Allows option ROMs to trap interrupt 19
PC Speaker/Beep Disabled
Enabled
Control the default beeps during boot of the system.
This setting will aldo control the beep during
enumeration and (un)plug of USB.
Default init boot order 0->4->3->5->2->1
0->4->3->5->1->2
1->2->3->5->0->4
3->5->1->2->0->4
3->0->4->1->2->5
2->1->0->4->3->5
2->0->4->3->1->5
3->1->0->4->2->5 The numbers in the sequence means:
0 = “Removables” (Floppy, LS100 etc.)
1 = “Hard Disk”
2 = “ATAPI CDROM”
3 = “BEV/onboard LAN”
4 = “USB” (any bootable USB device)
5 = “External LAN” (PCIe/PCI LAN card)
Force boot Device Disabled
Primary IDE Master
Primary IDE Slave
Third IDE Master
Third IDE Slave
Fourth IDE Master
Fourth IDE Slave
Network
Does override current boot setting. Device must be
in the boot priority menu though. If the device fails to
boot, the system will NOT try other devices.
Note: List of errors:
<INS> Pressed
Primary Master Hard Disk Error PCI I/O conflict
Timer Error S.M.A.R.T HDD Error PCI ROM conflict
Interrupt Controller-1 error Cache Memory Error PCI IRQ conflict
Keyboard/Interface Error DMA Controller Error PCI IRQ routing table error
Halt on Invalid Time/Date Resource Conflict
NVRAM Bad Static Resource Conflict