Kontron KTUS15-mITX - 1.1 Basic - Manual (Page 11)

KTD-00774-G KTUS15/mITX Page 11 of 84
I/O Control Winbond W83627DHG LPC Bus I/O Controller
Peripheral
interfaces
• Four USB 2.0 ports on I/O area
• Four USB 2.0 ports on internal pinrows
• Two / Four Serial ports (RS232C) (depending on board configuration)
• One Parallel port, SPP/EPP/ECP
• Two Serial ATA-150/300 IDE AHCI (depending on board configuration) w. RAID
support.
• One PATA 33/66/100 interface with support for 2 devices
• CF (Compact Flash) interface supporting CF type I and II. (UDMA2 max.). Note that
only one PATA device is supported when CF is used and only by use of 40-wire cable
(not 80-wire cable). Optionally, use SATA devices.
• PS/2 keyboard and mouse ports
LAN
Support
• 10/100/1000Mbits/s LAN using Intel ® 82574L controllers
• RPL/PXE netboot supported. Wake On LAN (WOL) supported (S3 only).
BIOS
• Kontron Technology / AMI BIOS (core version 8.00)
• Support for Advanced Configuration and Power Interface (ACPI 3.0), Plug and Play
o Suspend To Ram
o Suspend To Disk
o Intel Speed Step
• Secure CMOS/ OEM Setup Defaults
• “Always On” BIOS power setting
• System Locked Pre-Activation (SLP) key support
• Boot-Logo / Long splash support
• Setup for Forced Boot device
• Desktop Management Interface (DMI) with user-configurable setup
• TPM version 1.2 support
Expansion
Capabilities
• PCI Bus routed to 1 PCI slot (PCI Local Bus Specification Revision 2.3)
• PCI-Express bus routed to 2 (x1)PCI Express slots (PCI Express 1.0a)
• Two Secure Digital I/O (SDIO) card slots (backside)
• SMBus routed to TPM header, Feature connector, PCI, and PCI Express Slot
connectors
• LPC Bus routed to TPM connector
• DDC Bus routed to LVDS and CRT /DVI connector
• 8 x GPIOs (General Purpose I/Os) routed to FEATURE connector
Hardware
Monitor
Subsystem
• Smart Fan control system, support Thermal® and Speed® cruise for two onboard Fan
control connectors: FAN_CPU and FEATURE
• Three thermal inputs: CPU die temperature, System temperature and External
temperature input routed to FEATURE connector. (Precision +/- 3ºC)
• Voltage monitoring
• Intrusion detect input
• SMI violations (BIOS) on HW monitor not supported. Supported by API (Windows).
Operating
Systems
Support
• WinXP Professional
• Windows Vista
• Windows 7 *
• WinXP Embedded *
• Linux: Fedora Core 9 *, Fedora Core 10 *, Moblin *, Suse 11.1 *, Ubunty Jaunty (alpha
version) *
* = Limitations may apply (not all functions, drivers and features are tested).
(Continues)