Kontron KTUS15-mITX - 1.1 Basic - Manual (Page 60)

KTD-00774-G KTUS15/mITX Page 60 of 84
BIOS SETUP UTILITY
Advanced
Primary IDE Master Select the type of
devices connected to the
system
<-> Select Screen
|| Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Device :Hard Disk
Vendor :ST340014A
Size :40.0GB
LBA Mode :Supported
Block Mode :16Sectors
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-5
S.M.A.R.T. :Supported
Type [Auto]
LBA/Large Mode [Auto]
Block (Multi-Sector Transfer) [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
S.M.A.R.T. [Auto]
32Bit Data Transfer [Disabled]
V02.63+ (C)Copyright 1985-2008, American Megatrends, Inc.
Feature Options Description
Type Not Installed
Auto
CD/DVD
ARMD
Select the type of device connected.
(Feature only present on Primary IDE)
LBA/Large Mode Disabled
Auto
Auto: Enabling LBA mode if device supports LBA
and if the device is not already formatted with LBA
Mode disabled
Block (Multi-Sector Transfer) Disabled
Auto
Disabled: The Data transfer to and from device
occurs one sector at a time.
Auto: The Data transfer to and from device occurs
multiple sectors at a time if supported by device.
PIO Mode Auto
0, 1, 2, 3, 4
Selects PIO Mode
DMA Mode Auto
SWDMA0
SWDMA1
SWDMA2
MWDMA0
MWDMA1
MWDMA2
UDMA0
UDMA1
UDMA2
UDMA3
UDMA4
UDMA5
UDMA6
Selects DMA mode:
Auto: Auto detection
SWDMAn: Single Word DMA n
MWDMAn: Multi Word DMA n
UDMAn: Ultra DMA n
S.M.A.R.T. Auto
Disabled
Enabled
Select if the Device should be monitoring itself (Self-
Monitoring, Analysis and Reporting Technology
System)
32Bit Data Transfer Disabled
Enabled
Select if the Device should be using 32Bit data
Transfer