Kontron KTUS15-mITX - 1.1 Basic - Manual (Page 61)

KTD-00774-G KTUS15/mITX Page 61 of 84
7.3.3 Advanced settings – LAN Configuration
BIOS SETUP UTILITY
Advanced
LAN Configuration Control of Ethernet
Devices and PXE boot
<-> Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
ETH1 Configuration [Enabled]
MAC Address & Link status : 00E0F41E24A4 1GB
V02.63+ (C)Copyright 1985-2008, American Megatrends, Inc.
Feature Options Description
ETH1 Configuration Disabled
Enabled
With RPL/PXE boot
Disable/enable LAN or enabled with RPL/PXE boot
Note: The link status is “–“ if no LAN is connected otherwise it is 10MB, 100MB or 1GB depending on the
detected speed.