Kontron KTHM76-mITX User Manual
Ktqm77/mitx – kthm76/mitx users guide
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Introduction
- 1 Installation procedure
- 2 System Specification
- 3 Connector Locations
- 4 Connector Definitions
- 5 IO-Area Connectors
- 6 Internal Connectors
- 6.1 Power Connector (ATX/BTXPWR)
- 6.2 Fan Connectors (FAN_CPU) (J28) and (FAN_SYS) (J29)
- 6.3 PS/2 Keyboard and Mouse connector (KBDMSE) (J27)
- 6.4 Display connectors (Internal)
- 6.5 SATA (Serial ATA) Disk interface (J21 – J26)
- 6.6 USB Connectors (USB)
- 6.7 Firewire/IEEE1394 connectors (J13,J14)
- 6.8 Serial COM1 – COM4 Ports (J15, J16, J17, J18)
- 6.9 Audio Connectors
- 6.10 Feature Connector (FEATURE) (J30)
- 6.11 “Load Default BIOS Settings” Jumper (J37)
- 6.12 SPI Recover Jumper (J4)
- 6.13 SPI Connector (SPI) (J5)
- 6.14 XDP-CPU (Debug Port for CPU) (J32)
- 6.15 XDP-PCH (Debug Port for Chipset) (J33)
- 7 Slot Connectors (PCIe, miniPCIe, PCI)
- 8 On-board - & mating connector types
- 9 System Resources
- 10 BIOS
- 10.1 Main
- 10.2 Advanced
- 10.2.1 Advanced - PCI Subsystem Settings
- 10.2.2 Advanced - APCI Settings
- 10.2.3 Advanced - Trusted Computing
- 10.2.4 Advanced - CPU Configuration
- 10.2.5 Advanced - SATA Configuration
- 10.2.6 Advanced - Intel TXT (LT) Configuration
- 10.2.7 Advanced - AMT Configuration
- 10.2.8 Advanced - Acoustic Management Configuration
- 10.2.9 Advanced - USB Configuration
- 10.2.10 Advanced - SMART Settings
- 10.2.11 Advanced - Super IO Configuration
- 10.2.12 Advanced - Voltage Monitor
- 10.2.13 Advanced - Hardware Health Configuration
- 10.2.14 Advanced - Displayblock Setup
- 10.2.15 Advanced - LAN Configuration
- 10.2.16 Advanced - Delay Startup
- 10.2.17 Advanced - Serial Port Console Redirection
- 10.2.18 Advanced - CPU PPM Configuration
- 10.3 Chipset
- 10.4 Boot
- 10.5 Security
- 10.6 Save & Exit
- 11 AMI BIOS Beep Codes
- 12 OS Setup