Kontron KTHM76-mITX - Manual (Page 73)

KTQM77 – KTHM76 Users Guide
KTD-N0850-F Page 73
10.2.3 Advanced - Trusted Computing
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Advanced
Configuration
Security Device Support
TPM State
Pending operation
Current Status Information
TPM Enabled Status:
TPM Active Status:
TPM Owner Status:
[Enable]
[Enabled]
[None]
[Disabled]
[Deactivated]
[Unowned]
Enables or Disables BIOS
support for security device. O.S.
will not show Security Device.
TCG EFI protocol and INT1A
interface will not be available.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1226. Copyright © 2012 American Megatrends, Inc
Note: TPM State and Pending operation are only visible if Security Device Support is Enabled followed
by Save and Exit.
Function Selection Description
Security Device Support
Disabled
Enabled
Enables or Disables BIOS support for
security device. O.S. will not show Security
Device. TCG EFI protocol and INT1A
interface will not be available.
TPM State
Disabled
Enabled
Enable/Disable Security Device. NOTE: Your
Computer will reboot during restart in order
to change State of the Device.
Pending operation
None
Enable Take Ownership
Disable Take Ownership
TPM Clear
Schedule an Operation for the Security
Device. NOTE: Your Computer will reboot
during restart in order to change State of the
Device.
BIOS - Advanced