Kontron AM4140 IPMI Firmware - Manual (Page 10)

IPMI Firmware AM4140
Page 10 ID 1051-8188, Rev. 1.0
P R E L I M I N A R Y
Get Channel Payload Version 24.9 App 4Fh O / No
Get Channel OEM Payload Info 24.10 App 50h O / No
Master Write-Read 22.11 App 52h O / No
Get Channel Cipher Suits 22.15 App 54h O / No
Suspend/Resume Payload Encryption 24.3 App 55h O / No
Set Channel Security Keys 22.25 App 56h O / No
Get System Interface Capabilities 22.9 App 57h O / No
CHASSIS DEVICE COMMANDS O
Get Chassis Capabilities 28.1 Chassis 00h O / Yes
Get Chassis Status 28.2 Chassis 01h O / Yes
Chassis Control 28.3 Chassis 02h O / Yes
Chassis Reset 28.4 Chassis 03h O / No
Chassis Identify 28.5 Chassis 04h O / No
Set Chassis Capabilities 28.7 Chassis 05h O / No
Set Power Restore Policy 28.8 Chassis 06h O / No
Get System Restart Cause 28.11 Chassis 07h O / No
Set System Boot Options 28.12 Chassis 08h O / No
Get System Boot Options 28.13 Chassis 09h O / No
Get POH Counter 28.14 Chassis 0Fh O / Yes
EVENT COMMANDS M
Set Event Receiver 29.1 S/E 00h M / Yes
Get Event Receiver 29.2 S/E 01h M / Yes
Platform Event (a.k.a. “Event Message”) 29.3 S/E 02h M / Yes
Table 3: Standard IPMI Commands (Continued)
COMMAND
IPMI 2.0
SPEC.
SECTION
NETFN CMD
KONTRON
SUPPORT
ON MMC