Kontron PCI-761 - Manual (Page 56)

12. AMI BIOS Utility PCI 761 – User’s Guide (V1.01)
54 www.kontron.com
12.6.1. Boot Settings Configuration
¾ Quick Boot
Enabling this item lets the BIOS skip some power on self tests (POST). The default setting is Enabled.
¾ AddOn ROM Display Mode
This item selects the display mode for option ROM. The default setting is Force BIOS.
¾ Boot Num-Lock
Use this item to select the power-on state for the NumLock. The default setting is On.
¾ PS/2 Mouse Support
This item determines if the BIOS should reserve IRQ12 for the PS/2 mouse or allow other devices to make use
of this IRQ. Here are the options for your selection, Auto, Enabled and Disabled.
¾ Wait For ‘F1’ Of Error
If this item is enabled, the system waits for the F1 key to be pressed when error occurs. The default setting is
Enabled.
¾ Hit ‘DEL’ Message Display
If this item is enabled, the system displays the message “Press DEL to run Setup” during POST. The default
setting is Enabled.
¾ Interrupt 19 Capture
If this item is enabled, this function makes the option ROMs to trap Interrupt 19. The default setting is
Disabled.