Kontron PCI-761 - Manual (Page 69)

14. Configuring SATA for RAID PCI 761 – User’s Guide (V1.01)
www.kontron.com 67
(3) Configuring RAID by the RAID BIOS
Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to Section 4 if you do not want to
create a RAID.
(3)-1 After the POST memory testing and before the operating system booting, a message "Press <Ctrl-I> to enter
Configuration Utility" shows up, accordingly, press <CTRL+ I> to enter the RAID BIOS setup utility.
(3)-2 After you press <CTRL+ I>, the Create RAID Volume screen will appear. If you want to create a RAID array,
select the Create RAID Volume option in the Main Menu and press ENTER.