Kontron PCI-761 - Manual (Page 74)

14. Configuring SATA for RAID PCI 761 – User’s Guide (V1.01)
72 www.kontron.com
(4) Making a SATA Driver Disk
To install the operating system onto a serial ATA hard disk successfully, you need to install the SATA controller driver
during the OS installation. Without the driver, the hard disk may not be recognized during the Windows setup process.
First of all, please format a blank floppy disk. Secondly, follow up these steps below to produce a SATA driver disk.
Users can insert the Driver CD and the formatted blank floppy disk in another system. And then, please copy all of file of
the f6flpy32 folder in the Driver CD to a floppy disk.
Please copy all of file of the f6flpy64 folder, if installing 64-bit Windows Operating System.