Kontron COMe-bIP6 - Manual (Page 128)

COMe-bIP6 / BIOS Operation
8.5.4 Boot
Feature Options Description
Setup Prompt Timeout 1 Number of seconds to wait for setup activation key.
65535 (0xFFFF) means idefinite waiting. 0 means no
wait (not recommended)
Bootup NumLock State On
Off
Select the keyboard NumLock state
Quiet Boot Disabled
Enabled
Enables/Disables Quiet Boot option (Boot logo)
New HDD Priority Low
High
Boot priority for new connected HDD
Bootmenu Type Device Based
Port Based
Enables Device or Port based Bootmenu
Boot Port 1 … 4 Disabled
UEFI Shell
SATA 0 … 3
USB 0 … 7
OPROM 1
OPROM2
Any Device
USB devices behind hubs are not supported by Port
Based Bootmenu. Use Device Based Bootmenu for those
devices
GateA20 Active Upon Request
Always
Upon Request: GA20 can be disabled using BIOS
services. Always: do not allow disabling GA20; this
option is useful when any RT code is executed above
1MB
Option ROM Messages Force BIOS
Keep Current
Set display mode for Option ROM
Interrupt 19 Capture Disabled
Enabled
Enabled: Allows Option ROMs to trap INT19
Boot Option #1
Boot Option #2
Boot Option #3
…
Boot Device
Disabled
Set the system boot order by device group
Hard Drive BBS Priorities - Set the order of the legacy devices in this group
CD/DVD ROM Drive BBS Priorities - Set the order of the legacy devices in this group
Floppy Drive BBS Priorities - Set the order of the legacy devices in this group
128