Storage, Come-bip6 / product specification – Kontron COMe-bIP6 User Manual
Page 17
Advertising
COMe-bIP6 / Product Specification
Storage
onboard SSD
-
SD Card support
-
IDE Interface
-
Serial-ATA
2x SATA 6Gb/s, 2x SATA 3Gb/s
SATA AHCI
NCQ, HotPlug, Staggered Spinup, eSATA, PortMultiplier
SATA RAID
0, 1, 5, 10, MATRIX (QM77 only)
If SATA AHCI or RAID is disabled in setup, the SATA Interface only supports 3Gb/s transfer
rate and Staggered Spin-Up. To configure a RAID enable RAID support in BIOS Chipset/SATA
settings, connect at least two hard drives and enter the RAID Option ROM by pressing
'CTRL'+'I'
17
Advertising