Kontron M2M Smart Services Developer Kit Wind River Intelligent Device Platform - Manual (Page 19)

19
7. The user_registration.txt file should be emailed, as an attachment, to
[email protected]. A Wind River service representative from the Wind River
licensing department will then help you with further instructions.
A.2 Automatic License Activation on a Windows host
You may also activate the Evaluation by plugging the LiveUSB stick into any Windows machine and obtain an
Evaluation license automatically.
1. Plug the LiveUSB stick into any Windows machine and browse to the root of the stick.
2. Double click on the start.exe file. This will start the Wind River EDK Agent on your
Windows machine. Click the Automatic License Activation option.
3. From this point you can follow the instructions shown in section 3.3 to obtain an
Evaluation license.
4. Once a license has been obtained you can remove the LiveUSB stick from your
Windows machine and begin your Evaluation as detailed in section 3.4 above.
A.3 Manual License Activation on a Windows host
You may also activate the Evaluation by plugging the LiveUSB stick into any Windows machine and obtain an
Evaluation license by using email communication.
1. Plug the LiveUSB stick into any Windows machine and browse to the root of the stick.
2. Double click on the start.exe file. This will start the Wind River EDK Agent on your
Windows machine. Click the Manual License Activation option.
3. From this point you can follow the instructions shown in Appendix A.1: Manual License
Activation above to obtain an Evaluation license.