Kontron M2M Smart Services Developer Kit Wind River Intelligent Device Platform - Manual (Page 23)

23
Appendix D: Recovering Your Linux Image on the
Kontron M2M System
Your Kontron M2M System comes factory-installed with Wind River Intelligent Device Platform and a Qt Graphics
Suite demonstration. When you reset the target system, you should see the demonstration screen if the optional
display is connected.
Without a connected display you will have to ssh into the target.
If your target does not boot into the demonstration or allow you to ssh into it, you can restore the microSD
memory to its factory settings by performing the following procedure detailed in D.1 and D.2.