Kontron M2M Smart Services Developer Kit Wind River Intelligent Device Platform - Manual (Page 22)

22
Appendix C: Troubleshooting Graphics Problems on
Your LiveUSB Host Computer
The LiveUSB was validated with many different host computers, but some computers may have a graphics controller
that is incompatible with the default boot settings of the LiveUSB. If you see distorted graphics (or no graphics at all),
your host computer has an incompatible graphics controller. If this problem occurs, perform the following steps to
change your boot option.
Reboot your host computer. The screen shown in the figure below displays.
1. Press any key to interrupt the default boot process. The Wind River Embedded Development
Kit Video Options screen displays.
2. On your keyboard, press the down arrow key to navigate to Alternate Boot, then press
ENTER.
In many cases this alternate boot option resolves problems with incompatible
graphics drivers. If you continue to experience problems, try a different host
computer with a different graphics driver for the evaluation.