Kontron M2M Smart Services Developer Kit Wind River Intelligent Device Platform - Manual (Page 5)

5
This kit includes the following components:
The Kontron M2M System, pre-flashed with a Wind River Intelligent Device Platform kernel and root file system pre-
installed on the microSD with recovery image available on the LiveUSB. The pre-installed demonstration (including
the Wind River 4.3 Linux runtime) that runs from the target board Flash memory remains operative after the
demonstration license key expires.
One bootable LiveUSB flash drive (viewable as a non-boot device under Windows) to boot a host development
workstation. The Live USB contains software packages and components which help package Wind River Intelligent
Device Platform for the Embedded Platform. The User/Developer can quickly start working with the Wind River
Workbench development suite and can build a bootable image of Wind River Intelligent Device Platform for the
target. You will have 90 days to use the licensed Wind River Workbench products once the demo license key is
activated.
1.3 Required Hardware
Intel® Atom™ based Reference Platform for M2M
Specification
The Kontron M2M System is built on a COM Express module, which integrates with a carrier board to provide a
System controller. The Kontron M2M System is a high-performance, low-
power module based on the Intel® Atom™
processor. It uses an integrated two- chip solution comprised of the Intel® Atom™ E6xx series processor and Intel ®
System Controller Hub EG20T.
This evaluation is available for the Kontron M2M system with the following specifications:
An internal microSD boot device.
An Ethernet interface with default static IP alias address of
172.31.255.1
For this evaluation kit, the Kontron M2M System has been pre-flashed with a fully functional Wind River Intelligent
Device Platform image that boots the board into Linux and connects to the Wind River Workbench development tools
running on your host computer.
Host Computer Specification
During this evaluation you will run the Wind River Workbench development suite which requires a suitable host
computer. This host computer can be a laptop or desktop PC with the following specifications:
Host architecture: Intel Core2, 2 GHz or greater (recommended)
Host memory: 2 GB RAM (recommended)
USB requirements: USB 2.0 connection (required)
Static IP addresses: host computer ( 172.31.255.254 )
target ( 172.31.255.1 )
You do not need to install any software on your host computer prior to the evaluation.
1.4 LiveUSB Technology
All the software required for this evaluation on your host computer is delivered on a fully
configured, bootable USB flash drive (referred to as a LiveUSB) that you can boot on most
standard modern PCs. The LiveUSB contains: