Channel Vision 6128 - Manual (Page 12)

11
6.3 Connect the Power
Connect the indoor dome video output to a 75 Ohms type coaxial cable and
the DC-Jack or AC/ DC-Terminator to the power source.
z z Connect the outdoor dome video output to a 75 Ohms type coaxial cable
and the DC-Jack or AC/ DC-Terminato r to the power source.
When using conduit cabling, it is suggested to use a metal to cover over the
cables to prevent external damage.
To weatherproof, place weatherproof adhesive tape (P.T.F.E. THREAD SEAL TAPE)
onto the metal cover before installation.