Channel Vision 6128 - Manual (Page 20)

19
2. AGC MAX: Set AGC MODE to AUTO, AGC MAX setup range = 0~255.
3. SHUTTER SPEED consists of 9 types of modes: AUTO, NORMAL, FLICKERLESS
(NTSC: 1/60 and PAL: 1/50), 1/250, 1/1000, 1/2000, 1/4000, 1/10000, 1/20000,
1/50000 and 1/100000 (Default Setup: NORMAL).
4. DSS MAX: Low speed shutter control, offers optimal brightness level. Therefore, in
dark scene, raise the value higher than the the brightness level (Field Range: 2~256, Default
Setup: OFF).
5. DEFAULT: Return to default setup.
6. RETURN: Return to previous status.
8.3.4 WHITE BALANCE Setup:
WHITE BALANCE
WB MODE
RED GAIN
BLUE GAIN
PUSH AUTO
DEFAULT
RETURN AUTO
NA
NA
NA
ON
s
t
1. WB MODE: Five types of mode - AUTO, INDOOR, OUTDOOR, MANUAL,
and PUSH AUTO (Default Setup: AUTO).
2. RED GAIN/ BLUE GAIN operate only when WB MODE is set to MANUAL,
otherwise it is NA (Not Available).
3. When WB MODE is set to PUSH AUTO:
• PUSH AUTO ON: Enable auto tracing white balance.
• PUSH AUTO OFF: Depending on environment, disable auto tracing white
balance and record the current white balance value.
4. DEFAULT: Return to default setup.
5. RETURN: Return to previous status.