Channel Vision 6128 - Manual (Page 21)

20
8.3.5 PRIVACY MASK Setup:
PRIVACY MASK
AREA
MASK
START X
END X
START Y
END Y
DEFAULT
RETURN 1
OFF
20
70
20
30
ON
s
t
1. AREA: Maximum PRIVACY MASK area setting is 15 (Default Setup: 1).
2. MASK: Set MASK to “ON”, MASK AREA becomes available for setup and is
shown on the monitor (Default Setup: OFF).
3. START X: Horizontal start position (0~240).
4. END X: Horizontal end position (0~240).
5. START Y: Vertical start position (0~150).
6. END Y: Vertical end position (0~150).
7. DEFAULT: Return to default setup.
8. RETURN: Return to previous status.
Note:
When the privacy mask has been enabled the motion area that has been covered by the
privacy mask becomes ineffective.