Mercedes-Benz SLS-Class 2015 COMAND Manual - Manual (Page 115)

asking whether you wish to overwrite one
of the existing numbers.
X Select Yes or No .
If you select Yes , a selection list with the
five existing numbers is displayed.
X Select the number to be overwritten.
COMAND overwrites the selected number
with the new data.
Deleting Call Lists
This function is only available if you use a
Bluetooth ® phone without PBAB support, that
is, if the call lists have been created by
COMAND.
X Select Call Lists £ Delete Call
Lists from the basic telephone menu.
A query appears asking if all call lists are to
be deleted.
X Select Yes or No .
The call lists will either be deleted or not,
depending on your selection.
i If you use a mobile phone with PBAP
support, you have to delete the call lists on
the mobile phone. Next time you reconnect
the mobile phone, COMAND downloads the
empty call lists.
Making Calls
Incoming Call
Rejecting or Accepting Calls
Incoming calls are indicated by a dialogue
window.
X To reject: Select Reject .
or
X Press the I button on the COMAND
control panel or the ~ button on the
multifunction steering wheel.
X To accept: Select Accept .
or
X
Press the K button on the COMAND
control panel or the 6 button on the
multifunction steering wheel.
After accepting the call, you will conduct the
conversation over the hands-free system. The
call volume can be adjusted (
Y
page 36).
Please see the “Functions during a Single
Call” section for other functions
(
Y
page 114).
i You can also accept a call as described
above when COMAND is showing a display
of a different main application. The display
switches to the telephone display after you
accept the call. After the call is finished,
you see the display of the previous main
application again.
Initiating an Outgoing Call
Entering a Phone Number via the
COMAND Control Unit
X Open the phone main menu (
Y
page 106).
X
Enter all the digits on the numeric keypad
one after the other.
Making Calls
113
Telephone
Z