Interior lighting control, Crash-responsive emergency lighting, Changing bulbs – Mercedes-Benz C-Class 2011 Owners Manual User Manual

Page 113: Important safety notes, Lights and windshield wipers

Advertising
background image

Rear-compartment overhead control panel
:

p To switch the right-hand reading
lamp on/off

;

p To switch the left-hand reading lamp
on/off

Interior lighting control

Important notes

In order to prevent the vehicle's battery from
discharging, the interior lighting functions are
automatically deactivated after some time
except for when the key is in position

2 in the

ignition lock.

Automatic interior lighting control

X

To switch on/off: press the | button.
When the automatic interior lighting
control is activated, the button is flush with
the overhead control panel.

The interior lighting automatically switches
on if you:

R

unlock the vehicle

R

open a door

R

remove the key from the ignition lock

The interior light is activated for a short while
when the key is removed from the ignition
lock. You can activate this delayed switch-off
using the on-board computer (

Y

page 180).

Manual interior lighting control

X

To switch the front interior lighting on/

off: press the c button.

X

To switch the rear interior lighting on/

off: press the u button.

X

To switch the reading lamps on/off:

press the p button.

Crash-responsive emergency lighting

If the interior lighting is set to automatic, the
interior lighting is activated automatically if
the vehicle is involved in an accident.

X

To switch off the crash-responsive

emergency lighting: press the hazard

warning lamp button.

or

X

Lock and then unlock the vehicle using the
key.

Changing bulbs

Important safety notes

Xenon bulbs

If your vehicle is equipped with Xenon bulbs,
you can recognize this by the following: the
cone of light from the Xenon bulbs moves
from the top to the bottom and back again
when you start the engine. For this to be
observed, the lights must be switched on
before starting the engine.

G

Warning!

Xenon bulbs carry a high voltage. You could
get an electric shock and be seriously or even
fatally injured if you touch the electric
contacts on Xenon bulbs. Therefore, never
remove the cover from Xenon bulbs.
Do not change Xenon bulbs yourself, but have
them replaced at a qualified specialist
workshop which has the necessary specialist
knowledge and tools to carry out the work
required.

Changing bulbs

111

Lights and windshield wipers

BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe

Version: 3.0.3.6

2010-05-20T09:17:30+02:00 - Seite 111

Z

Advertising
This manual is related to the following products: