Mercedes-Benz C-Class 2011 Owners Manual - Manual (Page 237)

Clearing the remote control memory
X Turn the SmartKey to position 2 in the
ignition lock.
X Press and hold transmitter buttons ;
and ? for approximately 20 seconds until
indicator lamp : flashes rapidly.
The memory is cleared.
i You should clear the remote control
memory before selling the vehicle.
Compass
To obtain correct direction display in rear-
view mirror :, the compass must be
calibrated and the magnetic field zone set.
X To call up the compass: briefly press
button =.
The compass indicates the direction in
which the vehicle is currently driving:
N, NE,
E, SE, S, SW, W or NW.
X To calibrate the compass: determine
your position using the following the zone
maps.
Zone map for North America
Zone map for South America
X Press and hold button = for approximately
three seconds.
The currently selected zone appears in
compass display ;.
X To select the zone: press button =
repeatedly until the desired zone is
selected.
The zone has been selected when compass
display ; shows the point of the compass.
This takes a few seconds.
X To calibrate the compass: make sure that
there is sufficient space for you to drive in
Features
235
Loading, stowing and features
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe
Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 235
Z