Voice control – Mercedes-Benz C-Class 2009 COMAND Manual User Manual

Page 183

Advertising
background image

Radio and Satellite Radio

181

“Help Satellite Radio”

Using the “Help Satellite Radio” command,
you can have all the commands for the
satellite radio read out.

Selecting a Waveband

You can set the waveband with the following
commands:

R

“FM”

R

“AM”

“Next Station”/“Previous Station”

You can start manual tuning and set the next
station using the following commands:

R

“Next station”

R

“Previous station”

“Next Category”/“Previous Category”

You can use the following commands to
change the category on satellite radio:

R

“Next category”

R

“Previous category”

Selecting the Frequency (FM Range)

You can select frequencies within the FM
range (87.9 to 107.9 MHz) directly. Voice
control also recognizes the words
“frequency”, “point” and “megahertz”.
Example of dialog:

s

Eighty seven point five megahertz

u

Voice control sets the frequency.

Selecting the Frequency (AM Range)

You can select frequencies within the AM
range (530 to 1710 kHz) directly. Voice
control also recognizes the words
“frequency” and “kilohertz”.
Example of dialog:

s

Five hundred and thirty kilohertz

u

Voice control sets the frequency.

“Save Station”

Using the “Save station” command you can
give a voice tag to the station currently
selected. You can also use this command to
improve voice recognition for difficult names
or if you want to use a name of your own. You
could, for example, save a station with the
name “Favorite station”.

When you have given the command, voice
control prompts up to three times to say the
station name. When repeating the station
name, make sure that you pronounce it in
exactly the same way as you did the first time.
Otherwise, the name cannot be saved and
voice control aborts the saving procedure.
Example of dialog:

s

Save station

t

Please say the station name

s

Favorite station

t

Please repeat the station name.

s

Favorite station

t

The station has been saved.

“Select Station”

Using the “Select station” command, you can
select a saved station..
Example of dialog:

s

Select station

t

Please say the station name

s

Favorite station

u

Voice control sets the station

Voice Control

Z

Advertising