Mercedes-Benz C-Class 2009 COMAND Manual - Manual (Page 52)

Introduction
50
Map Software Is not Suitable for the
Navigation System or the System
Software
A message is displayed stating that the
navigation update DVD with the new map
data is not suitable for the system or the
system software.
COMAND ejectes the DVD.
X Remove the DVD from the slot 1 .
X Have the system software updated by an
authorized Mercedes-Benz Center.
i It will only be posssible to update the map
software once the system software has
been updated.
Map Software Matches the Navigation
System and the Current System Software
COMAND checks whether the DVD's map
data has already been installed.
Map Data Is Already Installed
The version release and a corresponding
message will be given on the display.
X To confirm message: Press n .
COMAND ejects the DVD.
Map Data Is not yet Installed
The version release and a query as to whether
the update should be carried out will be given
on the display.
X Select Yes or No.
If No is selected, COMAND ejects the DVD
automatically and the map data is not
updated.
X Remove the DVD from the slot 1 .
If Yes is selected, the map data is updated.
Updating the Map Data
While the update is in progress, a
corresponding message and a progress bar
are displayed. The progress bar fills from left
to right over the course of the update. The
navigation system is not functional until the
update is complete.
You cannot eject the DVD during the update.
If you switch COMAND off during the update,
this will interrupt the update and the update
will resume at the point of interruption when
the system is restarted.
While updating, COMAND may prompt you to
change the DVD. A corresponding message
is then displayed.
X Press the Eject button ë .
COMAND ejects the DVD.
X Remove the DVD from the slot 1 .
X Insert the DVD requested by COMAND.
If the update has been completed
successfully, a corresponding message is
displayed.
X To confirm message: Press n .
COMAND ejects the DVD.
X Remove the DVD from the slot 1 .
The update is complete.
If the update has not been completed
successfully, a message is displayed
indicating that the map update is not
possible.
X To confirm message: Press n .
COMAND ejects the DVD.
X Remove the DVD from the slot 1 .
An unseccussful update may be caused by
one of the following:
R DVD dirty or scratched.
Navigation