Problems with wipers, Controls in detail – Mercedes-Benz SL-Class 2009 Owners Manual User Manual

Page 108

Advertising
background image

Wipers

106

Single wipe

X

Press the combination switch briefly in
direction of arrow

2

to the resistance

point.
The windshield wipers wipe one time with-
out washer fluid.

Wiping with washer fluid

X

Press the combination switch in direction
of arrow

2

past the resistance point.

The windshield wipers operate with washer
fluid.

i

To prevent smears on the windshield or

noisy/chattering wiper blades, wipe with
washer fluid every now and then even when
it is raining.

For information on filling up the washer res-
ervoir, see “Washer system and headlamp
cleaning system” (

Y

page 208).

For information on cleaning the headlamps
with washer fluid, see “Headlamp cleaning
system” (

Y

page 103).

Problems with wipers

!

If anything blocks the windshield wipers

(leaves, snow, etc.), switch them off imme-
diately.

R

For safety reasons, stop the vehicle in a
safe location and

-

remove the SmartKey from the starter
switch
or

-

turn off the engine by pressing the
KEYLESS-GO start/stop button and
open the driver’s door (with the
driver’s door open, starter switch is in
position

0, same as with SmartKey

removed from starter switch)

-

engage the parking brake

before attempting to remove any block-
age.

-

Remove blockage.

-

Turn the windshield wipers on again.

If the windshield wipers fail to function at
all with the combination switch in position
I,

R

set the combination switch to the next
higher wiper speed

R

have the windshield wipers checked at
the nearest authorized Mercedes-Benz
Center

Controls in detail

Advertising