Mercedes-Benz SL-Class 2009 Owners Manual - Manual (Page 314)

Replacing bulbs
312
Front lamps
Lamp Type
1 Additional turn signal
lamp LED
2 Turn signal lamp PY 24 W
3 Low- and high-beam
headlamp
13
D1S-35 W
4 High-beam/high-beam
flasher lamp H7 (55 W)
Parking and standing
lamp W 5 W
(Blue
Vision)
Corner-illuminating
lamp H7 (55 W)
5 Front fog lamp H11 (55 W)
6 Side marker lamp W 5 W
Rear lamps
Lamp Type
7 Rear fog lamp (driver’s
side only) P 21 W
8 High-mounted brake
lamp LED
9 Backup lamp P 21 W
a Brake lamp, tail lamp,
parking and standing
lamp, side marker lamp LED
b License plate lamps C 5 W
c Turn signal lamp PY 21 W
Notes on bulb replacement
R Only use 12 volt bulbs of the same type and
with the specified watt rating.
R Switch the lights off before changing a bulb
to prevent short circuits.
R Always use a clean lint-free cloth when han-
dling bulbs.
R Your hands should be dry and free of oil and
grease.
R If the newly installed bulb does not come
on, contact an authorized Mercedes-Benz
Center.
Have the LEDs and bulbs for the following
lamps replaced at an authorized Mercedes-
Benz Center:
R Additional turn signal lamps in the exterior
rear view mirrors
R Front turn signal lamps
R High-mounted brake lamp
R Bi-Xenon lamps
R Front fog lamps
R Side marker lamps
R Parking and standing lamps in the tail lamp
unit
R Brake lamps
R Rear fog lamp
! Do not replace the LEDs yourself. You
could otherwise damage the LEDs or parts
of the vehicle. Only have the LEDs replaced
at an authorized Mercedes-Benz Center.
13 Low beam and high beam use the same D1S-35 W lamp. Do not replace the Bi-Xenon bulbs yourself. Contact an authorized Mercedes-Benz Center.
Practical hints