Mercedes-Benz SL-Class 2009 Owners Manual - Manual (Page 207)

Engine compartment
205
X Open the hood ( Y page 203).
1 Oil dipstick
2 Upper (max) mark
3 Lower (min) mark
X Pull out oil dipstick 1 .
X Wipe oil dipstick 1 clean.
X Fully insert oil dipstick 1 into the dipstick
guide tube.
X Pull out oil dipstick 1 again after approxi-
mately 3 seconds to obtain accurate read-
ing.
The oil level is correct when it is between
lower (min) mark
3 and upper (max) mark
2 of oil dipstick 1 .
i The filling quantity between the upper and
lower marks on the oil dipstick is approxi-
mately 2.1 US qt. (2.0 l).
i SL 63 AMG only:
The filling quantity between the upper and
lower marks on the oil dipstick is approxi-
mately 1.6 US qt. (1.5 l).
X If necessary, add engine oil.
For more information on engine oil, see
“Fuels, coolants, lubricants
etc.” (
Y page 350).
For information on messages in the multi-
function display concerning engine oil, see
the “Practical hints” section (
Y page 284).
Checking engine oil level with the con-
trol system
On the SL 600 and SL 65 AMG you can check
the engine oil level with the control system.
i In vehicles without engine oil measuring
system, the engine oil level is measured via
the oil dipstick (
Y page 204).
X Switch on the ignition.
The standard display appears in the multi-
function display (
Y page 129).
X Press button k or j on the multi-
function steering wheel repeatedly until the
following message appears in the multi-
function displays.
X After about 3 seconds, the following mes-
sage appears in the left multifunction dis-
play: Engine Oil Measuring Now.
One of the following messages will subse-
quently appear in the right multifunction dis-
play:
R
Engine Oil Level
OK
R
Add 1.0 qt
to reach max.
oil level.
(Canada: 1.0 liter)
R Add 1.5 qts
Operation
Z