Mercedes-Benz G-Class 2007 Owners Manual User Manual
Page 213
212
Controls in detail
Loading
Pulling partition net tight
3 Lift tensioner
4 Tightening belt
5 Belt hook
6 Cargo tie-down ring
Lift tensioner
3 on tightening belt 4
must point in direction of the windshield
(indicated by the arrow).
̈
Use lift tensioner
3 to set the length
of tightening belt
4 to cargo tie-down
ring
6.
̈
Hook belt hook
5 into cargo tie-down
ring
6.
̈
Pull tightening belt
4 by the loose end
until the partition net is slightly pulled
tight.
̈
Fold the rear seat bench rearward until
it locks into place.
The partition net will be tightened by
the rear seat bench.
̈
After driving a short distance, make
sure the partition net is still tight and, if
necessary, pull it tight again.
Installation partition net behind front
seats
Partition net installed behind front seats
̈
Fold the rear seat bench (together with
the rear seat backrest) forward
(