Mercedes-Benz GL-Class 2007 Owners Manual - Manual (Page 246)

245
Controls in detail
3-zone automatic climate control*
Setting the temperature
̈ Press button > ( ୴ page 232).
The indicator lamp on the button
comes on.
In display e ( ୴ page 232), you will see
the > symbol followed by MODE .
̈ Set the desired temperature for the
rear passenger compartment using
temperature control
3 ( ୴ page 243).
After approximately 3 seconds after
the last adjustment, the display switch-
es back to its standard display and the
indicator lamp on button
> goes
out.
Adjusting air distribution
Use the air distribution controls 5 or 6
to adjust the air distribution for the rear
passenger compartment.
The symbols on the controls represent the
following functions:
Adjusting manually
̈ Press the desired air distribution con-
trol.
The indicator lamp on button U
goes out.
Adjusting automatically
̈ Press button U while the engine is
running.
The indicator lamp on the button
comes on. The air distribution is adjust-
ed automatically.
Setting the temperature
Use temperature control 3 ( ୴ page 243)
to separately adjust the air temperature of
the rear passenger compartment.
You should raise or lower the temperature
setting in small increments, preferably
starting at 72°F (22°C). The automatic cli-
mate control will adjust to the set temper-
ature as fast as possible.
i You can also press the > button once
more to switch back to the standard display.
Symbol Function
Z Directs air to the center air
vents
Y Directs air to the footwells and
the side air vents
i
The rear automatic climate control will not
cool the air when the air conditioning is switched
off (
୴ page 241).