Mercedes-Benz GL-Class 2007 Owners Manual User Manual
Page 301
![background image](/manuals/638623/301/background.png)
300
Controls in detail
Loading
1 Key
2 Cover cap
3 Sticker FRONT (or REAR)
4 Screw for clamping claw
5 Clamping claw
The front and rear basic cross bars are of
different lengths. Please pay close atten-
tion to stickers
3 FRONT and REAR on the
basic cross bars.
̈
Unlock cover cap
2 with key 1.
̈
Remove cover cap
2.
Sticker
3 indicating the location,
FRONT or REAR, becomes visible.
̈
Turn screw
4 counterclockwise with
the included Allen wrench until
clamping claw
5 is wide open.
6 Front basic cross bar
7 Rear basic cross bar
8 Gaps
9 Markings
a Roof rails
̈
Place front basic cross bar
6 between
markings
9 on roof rails a.
4 Screw for clamping claw
5 Clamping claw
a Roof rail
̈
Make sure clamping claw
5 lies flush
against the inside of roof rail
a as
shown in the illustration.
If necessary, adjust clamping width of
basic cross bars (
̈
Slightly tighten screw
4 on both sides
by turning it clockwise.
i
Markings
9 are located on the inside of
each roof rail, indicated by the white lines in the
illustration.