Mercedes-Benz GL-Class 2007 Owners Manual User Manual
Page 251
250
Controls in detail
Power windows
Fully opening the door windows
(Express-open)
̈
Press switch
1, 2, 3, or 6
page 248) past the resistance point
and release.
The corresponding door window opens
completely.
Fully closing the door windows
(Express-close)
̈
Pull switch
1, 2, 3, or 6
page 248) past the resistance point
and release.
The corresponding door window closes
completely.
̈
Remove the obstruction.
̈
Pull the respective door window switch
past the resistance point again and
release.
Stopping door windows during
Express-operation
̈
Press or pull the respective door
window switch again.
Hinged quarter windows*
The switches for opening and closing the
hinged quarter windows are located on the
door control panel of the driver’s door
(
1 Hinged quarter windows: opening
2 Hinged quarter windows: closing
Opening
̈
Press and release switch
1.
To stop the hinged quarter window:
̈
Press and release switch
1 once
more.
Warning!
G
Driver’s door only:
If within 5 seconds switch is again pulled
past the resistance point and released, the
automatic reversal will not function.
i
If the upward movement of a door window is
blocked during the closing procedure, the door
window will stop and open slightly.
i
If the door window still does not close when
there is no obstruction, pull and hold the respec-
tive power window switch. The door window will
then close without the obstruction sensor
function.