Mercedes-Benz GL-Class 2007 Owners Manual User Manual
Page 527
526
Practical hints
Flat tire
Removing the wheel
1 Alignment bolt
̈
Unscrew upper-most wheel bolt and
remove it.
̈
Replace this wheel bolt with alignment
bolt
1 supplied with the tool kit
̈
Remove the remaining bolts.
̈
Remove the wheel.
Mounting the new wheel
1 Wheel bolt for 19" and 20" light alloy
wheels
2 Wheel bolt for Minispare wheel (locat-
ed in vehicle tool kit (
̈
Clean contact surfaces of wheel and
wheel hub.
Warning!
G
The jack is intended only for lifting the
vehicle briefly for wheel changes. It is not
suited for performing maintenance work
under the vehicle.
ț
Never start the engine when the vehicle
is raised.
ț
Never lie down under the raised vehicle.
!
Do not place wheel bolts in sand or dirt. This
could result in damage to the bolts and wheel
hub threads.
!
Wheel bolts
2 must be used when mount-
ing the Minispare wheel. The use of any wheel
bolts other than wheel bolts
2 for the Minispare
wheel will damage the vehicle’s brakes.
୴୴