Important safeguards – Cuisinart CSB-77 User Manual

Page 2

Advertising
background image

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic safety precautions should
always be followed including the following:

1. READ ALL INSTRUCTIONS.

2. To protect against electrical shock, do not put the motor body,cord

or electrical plug of this hand blender in water or other liquid. The
detachable blending shaft of this appliance has been designed for
immersion into water or other liquids. Never submerge any other
portion of this unit. If hand blender falls into liquid, remove immediately.
Do not reach into the liquid without unplugging the unit first.

3. This appliance should not be used by children. To avoid possible

accidental injury, close supervision is necessary when any appliance
is used by or near children.

4. Unplug from outlet when not in use, before putting on or taking

off parts, and before cleaning. To unplug, grasp plug and pull
from electrical outlet. Never pull cord.

5. Avoid contacting moving parts.

6. During operation keep hands, hair, clothing, as well as spatulas and

other utensils away from attachments and any mixing container, to
reduce risk of injury to persons, and/or damage to the appliance.
A spatula may be used, but must be used only when the unit is
not operating.

7. Do not operate any appliance with a damaged cord or plug, or after

the appliance has malfunctioned or has been dropped or damaged in
any way or is not operating properly. Return the appliance to the
nearest Cuisinart Repair Center for examination, repair, or
mechanical or electrical adjustment.

8. Remove detachable shaft from the blender before washing the blades

or shaft.

9. Blades are SHARP. Handle carefully when removing, inserting

or cleaning.

10. When mixing liquids, especially hot liquids, use a tall container or

make small quantities at a time to reduce spillage, splattering and
possibility of injury from burning.

11. To reduce the risk of injury, never place chopper/grinder attachment

cutting blade on base without first putting prep bowl properly in place.

12. Be certain the chopper/grinder attachment cover is securely locked in

place before operating appliance. Do not attempt to remove cover
until blade has stopped rotating.

13. Check prep bowl for presence of foreign objects before using.

2

Advertising